诚实守信、客户至上注重工作细节，提高服务品质

　　佛山市精燃机电设备有限公司专业制造回转窑焚烧炉燃气烧嘴，得到了客户的高度认可。

　　回转窑焚烧炉燃气烧嘴是一种适应性很强，能焚烧多种液体和固体废物的多用途焚烧炉烧嘴。除了重金属、水或无机化合物含量高的不可燃物外，各种不同物态(固体、液体、污泥等)及形状(颗粒、粉状、块状及桶状)的可燃性废物皆可送入回转窑中焚烧。回转窑焚烧炉燃气烧嘴技术可行性指标较高，易于操作。从目前国内外的情况来看，采用回转窑焚烧炉燃气烧嘴对危险废物进行处理的比例是较高的。

　　使用精燃机电制造的回转窑烧嘴的回转窑焚烧炉具有以下特点

　　①本设备可同时焚烧固体废物、液体、气体、对焚烧物适应性强;

　　②焚烧物料翻腾前进，三种传热方式并存一炉，热利用率较高;

　　③燃气烧嘴寿命长而且改变温度方便，费用低;

　　④传动机理简单，传动机构均在窑外壳，设备运转安全，维修简单;

　　⑤对焚烧物形状、含水率要求不高;

　　⑥回转窑内较长的停留时间和700℃的高温，使危险废物全面热解，部分低燃点垃圾基本燃尽;二燃炉强烈的气体混合使得烟气中未完成燃烧物完全燃烧达到有害成分分解所需的高温(1150℃)，高温区烟气停留为2秒;不但使垃圾焚尽烧透，还从源头有效地分解了二恶英;

　　⑦良好的密封措施和炉膛负压，保证有害气体不外泄;

　　⑧设备运转率高，年运转率一般可达90%以上，操作维修方便;

　　⑨回转窑内增设强化换热及防止结渣装置，在提高焚烧率的同时扩大了焚烧炉对废物的适应性;

　　⑩ 将传统二燃室演变为二燃炉，提高了灰渣的燃尽率，提高了回转窑的焚烧效率，同时具有常温出渣、渣料破碎、密封锁风等综合功能。本设备成熟可靠，可完全国产化，并已有丰富的制造经验。

　　回转窑焚烧炉燃气烧嘴，回转窑燃烧系统，就选择佛山市精燃机电设备有限公司!!!!

Foshan fine combustion mechanical and Electrical Equipment Co., Ltd. specializes in manufacturing gas burners for rotary kiln incinerators, which has been highly recognized by customers.

The gas burner of rotary kiln incinerator is a kind of multi-purpose incinerator burner with strong adaptability, which can burn a variety of liquid and solid wastes. In addition to the nonflammables with high content of heavy metals, water or inorganic compounds, all kinds of combustible wastes with different physical states (solid, liquid, sludge, etc.) and shapes (particle, powder, block and barrel) can be sent to the rotary kiln for incineration. The technical feasibility index of gas burner of rotary kiln incinerator is high and easy to operate. From the current situation at home and abroad, the proportion of hazardous waste treatment by using gas burners of rotary kiln incinerators is relatively high.

The rotary kiln incinerator with the rotary kiln burner manufactured by the fine combustion machine has the following characteristics

① The equipment can burn solid waste, liquid and gas at the same time, and has strong adaptability to incineration;

② Three ways of heat transfer coexist in one furnace, and the heat utilization rate is high;

③ Gas burner has long life, convenient temperature change and low cost;

④ The transmission mechanism is simple, the transmission mechanism is all in the kiln shell, the operation of the equipment is safe and the maintenance is simple;

⑤ The requirements for the shape and moisture content of the incineration materials are not high;

⑥ The long residence time and high temperature of 700 ℃ in the rotary kiln make the hazardous waste fully pyrolyzed, and part of the waste with low ignition point burn out basically; the strong gas mixing in the second combustion furnace makes the unfinished combustion in the flue gas reach the high temperature (1150 ℃) required by the decomposition of harmful components, and the flue gas in the high temperature zone stays for 2 seconds; it not only makes the waste burn out completely, but also decomposes the dioxin effectively from the source;

⑦ Good sealing measures and furnace negative pressure to ensure no leakage of harmful gas;

⑧ The operation rate of the equipment is high, and the annual operation rate is generally over 90%, which is convenient for operation and maintenance;

⑨ The rotary kiln is equipped with a device to strengthen heat exchange and prevent slagging, which not only improves the incineration rate, but also expands the adaptability of the incinerator to waste;

⑩ The traditional secondary combustion chamber is transformed into a secondary combustion furnace, which improves the burn out rate of ash and slag, improves the burning efficiency of rotary kiln, and has the comprehensive functions of normal temperature slag discharge, slag crushing, sealing and air locking. The equipment is mature and reliable, can be completely localized, and has rich manufacturing experience.

Gas burner of rotary kiln incinerator, combustion system of rotary kiln, Foshan fine combustion Electromechanical Equipment Co., Ltd!!!!